Description
The SCARTpoint adapter allows a direct SCART connection to the Extron CrossPoint matrix switch. There are two geometries, an “upper” and a “lower”, they need to be installed in an alternating pattern, two of the same geometry cannot be installed adjacently. Both geometries are available as inputs (to Extron) or outputs (from Extron).
Important Note: For use with Extron CrossPoint with BNC vertical center-to-center distance of 16.5 mm only. Please measure your CrossPoint prior to order, this will not fit older units with 20.3 mm vertical distance.
Included Accessories:
- (1) of TRS 3.5 mm Male-to-Male Stereo Audio Cable.
- (1) of 5P 3.5 mm Phoenix to TRS 3.5 mm Female Stereo Audio Adapter.
- (4) of Male RCA to Male BNC Adapters.
- (1) of SCART-Lock (Black).
Features:
- SCART-Lock mounting posts in accordance with KTL 0158 specification.
- Female SCART connection.
- Female TRS 3.5mm stereo audio connection.
- Male RCA Red, Green, Blue, Sync connections.
- Input Only: LM1881M Sync Stripper for CSync.
- Input Only: Switch to Disable or Enable Sync Stripper.
- Output Only: 470 ohm Resistor for 75ohm level CSync.
Resources and Credits:
- GitHub
- This is a clean sheet design, but was inspired by rattboi’s Extron SCART Adapter.
- 5P 3.5 mm Phoenix to TRS 3.5 mm adapters created by Jacob Proctor.
- It is also possible to use pigtail 3.5mm with genuine Phoenix Contact 1840395 (not provided).
